91

w
PAX A920
Configuration
Guide
2023
weareplanet.com
PAX A920 Configuration Guide
weareplanet.com
1
Table of contents
1. Switching on the A920 terminal ....................................................................................................................... 2
2. Connecting the terminal to a wireless network ................................................................................................ 3
3. Navigating the configuration menus ................................................................................................................ 4
4. Finding and selecting the Wi-Fi network .......................................................................................................... 5
5. Static IP address configuration ........................................................................................................................ 6
6. Downloading firmware and configuration files .................................................................................................. 7
7. Installing the SIM and cellular network ............................................................................................................ 9
8. 91 .................................................................................................................................................... 12
PAX A920 Configuration Guide
weareplanet.com
2
1. Switching on the A920 terminal
Power On: Press and hold the Power button for 3 seconds until the LED beside the IC card slot is lit, to
indicate the terminal is initialising.
Power Off: Press and hold the Power button for 3 seconds until the shutdown menu appears, tap
Power off > Click Power off and then “shutting down….” appears as the terminal powers off.
Contactless card tap
Magnetic stripe
Power on/off button
Touch screen
Magnetic stripe
Rear
camera
Front camera
PAX A920 Configuration Guide
weareplanet.com
3
2. Connecting the terminal to a wireless network
When first turned on, the terminal will display the main Android menu.
1. To proceed, the user must open the “IntegraTE_PAX” application by tapping on its icon.
2. Once the application has been loaded, the user is presented with the “Invalid terminal DzԴھ”
screen.
3. To access the configuration menu, the user must press and hold the Planet logo until the “Enter
password” screen loads.
4. The user must enter “12357896” as the password and then confirm using the green “Enter”
button. Use this password on initial setup. Password can be changed via request to Planet
Technical Support and thereafter use the new password.
PAX A920 Configuration Guide
weareplanet.com
4
3. Navigating the conguration menus
Upon successfully entering the password, the user is presented with four options within the
initial configuration menu.
1. The user must select option 3 “Configuration” to proceed.
2. From the next menu, the user must select option 2. “Network”
3. On the next two screens, the user should select option 2 “WLAN” followed by option 4 “CDzԴھ”
4. If the Wi-Fi option is disabled, upon selecting “WLAN” the terminal will prompt the user to enable
the module.
5. The user must select Ԩ”.
PAX A920 Configuration Guide
weareplanet.com
5
4. Finding and selecting the Wi-Fi network
The user will now see the “Wi-Fi” menu and should see a list of available wireless networks.
1. Find and select the network associated with the location where the terminal will be in use.
2. When selected, the terminal will require the user to enter the network password. For compliance
purposes, all networks used with payment terminal should be password protected.
3. If the terminal will be utilising DHCP (Dynamic Host Configuration Protocol), the user can tap on
the “Connect” button after entering the network password.
PAX A920 Configuration Guide
weareplanet.com
6
5. Static IP address conguration
1. On the network password screen, the user must expand the “Advanced options” drop down
menu.
2. The user then must expand the “IP settings” drop down menu and select “Sٲپ”.
3. Upon selecting “Static”, the terminal will bring up a screen where the user must enter the following
information:
- IP address
- Gateway
- DNS 1
- DNS 2
The network prefix length should be left as 24 (default) unless advised otherwise.
PAX A920 Configuration Guide
weareplanet.com
7
6. Downloading rmware and conguration les
1. From the initial configuration menu, the user must select option 3: “Configuration”.
2. Followed by option 3: “Update”.
3. Then option 1: “Fɲ”.
4. The user must then verify that the information on “Enter the TMS IP/DNS” and “Enter the
TMS port” screens matches the information below.
If so, the user can proceed by tapping the green “Enter” button on both screens to go to “Enter
TMS TID” screen.
PAX A920 Configuration Guide
weareplanet.com
8
5. On the “Enter TMS TID” screen, the user must enter the terminal ID provided by Planet. This ID
will consist of 8 digits.
Once entered, the user must confirm by tapping on the green “Enter” button.
6. The terminal will now perform various operations where the user will see on screen “Firmware
download in progress xx%”, “Configuration download in progress” and “Event upload in
Dz”.
In-between each of these operations, the terminal will restart the “IntegraTE_PAX” application.
The user should not interact with the terminal until it displays the TID number.
PAX A920 Configuration Guide
weareplanet.com
9
7. Installing the SIM and cellular network
Before doing anything with the SIM set up process, ensure that a valid SIM card is inserted into the
SIM1 slot and that it is correctly positioned.
SIM1 Slot
PAX A920 Configuration Guide
weareplanet.com
10
1. The user must select option 3 “Configuration” to proceed.
2. From the next menu, the user must select option 2. “Network”
3. On the next two screens, the user should select option 2 “GPRS” followed by option 4 “CDzԴھ”
4. If the Wi-Fi option is disabled, upon selecting “GPRS” the terminal will prompt the user to enable
the module.
The user must select “۱”.
5. Pull down notification bar by dragging your finger down from the top of the screen then tap on the
Wi-Fi icon to disable it.
6. Go back to the main home screen. In the top right corner above the signal strength icon, it
will display either 3G or 4G.
PAX A920 Configuration Guide
weareplanet.com
11
7. To enable Cellular Data (also called Mobile Data on some models), pull down the notification bar
from the top, then press and hold on the Signal strength icon.
8. Under the Cellular Data menu, tap the slider to enable it.
If both Wi-Fi and GPRS are enabled,
the terminal will always prioritise
Wi-Fi.
If the signal strength does not show
3G or 4G, it could potentially be:
•
Incorrect APN
•
Incorrectly inserted SIM
•
Poor signal
•
Cellular data (also called Mobile
data on some models) being
switched off. By default, it should be
turned on but it’s worth checking.
Refer to step below on how to
PAX A920 Configuration Guide
weareplanet.com
12
8. 91
Need help?
If you have a technical issue or need support troubleshooting, please check the relevant
portal for assistance.
Our Global Support Team will be glad to help.
Visit www.weareplanet.com/support
Disclaimer:
The procedures included in the document are only valid for brand new terminals. Terminals
used beforehand may behave differently.